August 2020, Volume 7 Issue 1
Holistic Overview of Structural Design and Construction
Table of Contents
-
1.1 SPECIALIZED DESIGN OF ARCHITECTURAL OBJECTS FOR THE REHABILITATION OF PEOPLE WITH VISUAL DISABILITIES ENRIQUE VILLACIS TAPIA, MARIA LORENA RODRIGUEZ, DANIELA JARRIN, JAVIER VIZCAINO, and CYNTHIA AYARZA -
1.2 REHABILITATION OF BRICK-WALL FAÇADES VITOR ABRANTES, NUNO ABRANTES, and FERNANDO BRANDÃO ALVES -
1.3 ENVISIONING FUTURE DIRECTIONS IN PUBLIC RESOURCES SILVIA MAZZETTO -
1.4 LEBANESE HERITAGE: PRESERVING VALUES TO BUILD IDENTITY SILVIA MAZZETTO -
1.5 ARCHITECTURAL POTENTIALITY OF FREE-FORM STRUCTURES ANAS HAMEED, HODA AL-ALWAN, and NAZAR OUKAILI -
1.6 STRUCTURAL CONCEPTS IMPLEMENTED WHILE SURVEYING BUILDINGS OF HISTORICAL AND CULTURAL SIGNIFICANCE MIROSLAV TODOROV and MIHAIL TODOROV -
1.7 EFFECT OF APPLIED INTERIOR THERMAL INSULATION SYSTEMS ON THE ENERGY PERFORMANCE OF A HISTORICAL/CONTEMPORARY MASONRY JAN KOČÍ, JIŘÍ MADĚRA, and MILOŠ JERMAN
-
2.1 COMBINED EFFECT OF WIND SPEED AND COVERING IRRIGATION CANALS ON WATER QUALITY PARAMETERS SHERINE AHMED EL BARADEI and MAI ALSADEQ -
2.2 A FRAMEWORK FOR EMERGENT NEEDS ANALYSIS DURING FRONT-END DESIGN IN SOCIAL HOUSING JOAS SERUGGA, MIKE KAGIOGLOU, and PATRICIA TZORTZOPOULOS -
2.3 INFLUENCE OF VERTICAL GARDENS ON THE AIR QUALITY OF A CITY HISTORIC CENTER FRANCISCO RAMIREZ, DAVID CHUQUER, ANDREA VALLEJO ESPINOSA, and MICHAEL MAKS DAVIS -
2.4 A MANUAL SUCTION TOILET FOR SEWAGE REDUCTION ANDRES BASANTES, JOSE SAEZ, MICHAEL DAVIS, and AMELIA TAPIA -
2.5 SANITARY SEWER CONSTRUCTION COST COMPARISON BETWEEN TRENCHLESS CIPP RENEWAL AND OPEN-CUT REPLACEMENT VINAYAK KAUSHAL, MOHAMMAD NAJAFI, and RAMTIN SERAJIANTEHRANI
-
3.1 QUANTIFYING UNCERTAINTY IN SIMULATION MODELING JACE THIBAULT and SIMAAN ABOURIZK -
3.2 ALAMILLO BRIDGE: CONSTRUCTION SIMULATION MODELS IN EZSTROBE PHOTIOS G. IOANNOU and VEERASAK LIKHITRUANGSILP -
3.3 A RELATIONAL DATABASE MANAGEMENT SYSTEM FOR LIFE-CYCLE COST ANALYSIS OF BIM PROJECTS VEERASAK LIKHITRUANGSILP, HANG T. T. LE, NOBUYOSHI YABUKI, and PHOTIOS G. IOANNOU -
3.4 BUNDLING: AN INNOVATION IN BRIDGE DELIVERY DANIEL D'ANGELO, R. EDWARD MINCHIN JR., YIFENG TIAN, and BANG AN -
3.5 A SYNTHESIS OF CONSTRUCTABILITY IN TRANSPORTATION CONSTRUCTION R. EDWARD MINCHIN JR., MACKIE MYERS, DAN TRAN, and YIFENG TIAN -
3.6 IMPROVING CONSTRUCTION PROJECT PERFORMANCE IN DEVELOPING COUNTRIES: CONTRACTOR APPROACH SAMUEL A. ADEKUNLE , CLINTON AIGBAVBOA, and OBUKS A. EJOHWOMU -
3.7 BLOCKCHAIN APPLICATION FOR CONTRACT SCHEMES IN THE CONSTRUCTION INDUSTRY GIULIA PATTINI, GIUSEPPE MARTINO DI GIUDA, and LAVINIA CHIARA TAGLIABUE -
3.8 FACTORS MILITATING AGAINST EFFECTIVE BUILDING MATERIALS MANAGEMENT (EBMM) IN CONSTRUCTION PROJECTS KUNLE OGUNDIPE, JAMES OWOLABI, and CHADRIL OGBEBOR -
3.9 PRODUCTIVITY IN CONSTRUCTION INDUSTRY KHEDHER YAHYA ALMATHAMI, VAUGHAN COFFEY, and BAMBANG TRIGUNARSYAH -
3.10 THE FACTORS MILITATING INTERNAL STAKEHOLDERS ON ROAD INFRASTRUCTURE PROJECTS NOKULUNGA XOLILE MASHWAMA, WINNIE MUSHATU, DIDIBHUKU THWALA, and CLINTON AIGBAVBOA -
3.11 BIM AND VR/AR TECHNOLOGIES: FROM PROJECT DEVELOPMENT TO LIFECYCLE ASSET MANAGEMENT OSSAMA SALEM, IMMANUEL JOHN SAMUEL, and SONG HE -
3.12 FORECASTING CONSTRUCTION DELAY TIMES IN HIGH-RISE BUILDING PROJECTS MUIZZ SANNI-ANIBIRE, ROSLI ZIN, and SUNDAY OLATUNJI
-
4.1 THE EFFECTS OF POOR MANAGEMENT PRACTICES ON PROJECTS PERFORMANCE SAUD ALMUTAIRI and ABDULLATIF ALMUNIFI -
4.2 PROFIT SHARING IN OVERCOMING PROJECT RESULTS AS A STRATEGY TO INCREASE REVENUE FOR CONSTRUCTION COMPANIES TIELY ZURLO MOGNHOL, TÁSSIA FARSSURA LIMA DA SILVA, and SILVIO BURRATTINO MELHADO -
4.3 ANALYZING THE HUMAN SPHERE WITH THE CIRCULAR ECONOMY MODEL IN POST-EARTHQUAKE CONSTRUCTION: MECHE’S HOUSE PAULINA CRIOLLO and ENRIQUE VILLACIS TAPIA -
4.4 A META ANALYSIS OF DECISION MAKING PROBLEMS IN CONSTRUCTION RISK MANAGEMENT KERIM KOC and ASLI PELIN GURGUN -
4.5 THE KA LOKO TRAGEDY AMARJIT SINGH -
4.6 PHASE CHANGE MATERIALS RANKING BY USING THE ANALYTIC HIERARCHY PROCESS ABID NADEEM, KAISAR RAKHMAN, and MD ASLAM HOSSAIN -
4.7 A SEQUENTIAL AUGMENTED METAMODELING METHOD FOR ENGINEERING RELIABILITY ANALYSIS QIAN WANG and JUN JI -
4.8 OVERVIEW OF SAFETY PERFORMANCE IN THE CONSTRUCTION INDUSTRY ABUBAKAR SADIQ MAHMOUD, MOHD. HAMDAN AHMAD, and YAHYA MOHD. YATIM -
4.9 FACTORS INFLUENCING MANAGEMENT COMMITMENT TO SAFETY PERFORMANCE IN THE CONSTRUCTION INDUSTRY ABUBAKAR SADIQ MAHMOUD, MOHD. HAMDAN AHMAD, and YAHYA MOHD. YATIM -
4.10 CAUSES OF SCAFFOLD ACCIDENTS IN CONSTRUCTION INDUSTRY MUIZZ SANNI-ANIBIRE, ABUBAKAR MAHMOUD, and MAJED AL-AYOUNI -
4.11 EVALUATION OF HEALTH AND SAFETY INSPECTIONS IN THE CONSTRUCTION INDUSTRY GEORGIA C. SAVVA, ELIA A. TANTELE, and RENOS A. VOTSIS
-
5.1 QUO VADIS CIVIL ENGINEERING EDUCATION: 20 YEARS AFTER BOLOGNA DECLARATION ULRIKE QUAPP and KLAUS HOLSCHEMACHER -
5.2 BREAKING STUDENTS’ COMFORT ZONE: LEARNING FROM COMMUNITY MEMBERS, A STRATEGY WITHIN THE AEC EDUCATION ENRIQUE VINICIO VILLACIS TAPIA, INDIA LUXTON, RODOLFO VALDES VASQUEZ, MEHMET EGEMEN OZBEK, and CYNTHIA AYARZA -
5.3 PERTINENCE OF A NEUROSCIENCE CONSTRUCTION INDUSTRY CLASS IN ORDER TO RAISE GLOBAL CRISIS AWARENESS ENRIQUE VILLACIS TAPIA and CYNTHIA AYARZA -
5.4 DIVINING THE FUTURE: INTEGRATIVE TECHNOLOGICAL THINKING IN ARCHITECTURAL PEDAGOGY MARKELLA MENIKOU, and ADONIS CLEANTHOUS -
5.5 KNOWLEDGE AREAS FOR TRAINING JUNIOR CIVIL ENGINEERS IN OPERATIONS AND CONSTRUCTION MANAGEMENT TASKS SMADAR SHILONY, YEHIEL ROSENFELD, EITAN GOLDSCHMIDT, and SHRAGA SHOVAL
-
6.1 ON THE MODULUS OF SUBGRADE REACTION FOR SHALLOW FOUNDATIONS ON HOMOGENOUS OR STRATIFIED MEDIUMS LYSANDROS PANTELIDIS -
6.2 LANDSLIDE INVESTIGATION ASPECTS MIROSLAV TODOROV, MIHAIL TODOROV, and GEORGI KAMENAROV -
6.3 EFFECT OF REPLACING CRUSHED STONE IN STONE COLUMNS BY WASTE MATERIAL ON SOIL IMPROVEMENT RATIO NAHLA MOHAMMED SALIM, SHATHA HASAN, and KAWTHER AL-SOUDANY -
6.4 INVESTIGATING THE INTERACTION BETWEEN STABILIZED EXCAVATION BY NAILING AND ADJACENT URBAN TUNNELS: CASE STUDY SOMAYE HOSSEINI and MAHMOOD PARSAEI -
6.5 INTERACTION OF TWO SEMI-CYLINDRICAL CANYONS EXCITED BY SH WAVES ABDUL HAYIR and SINAN EMRE CANKAYA -
6.6 THE EFFECTS OF POOR PERFORMANCE ON ROADS INFRASTRUCTURE PROJECT WINNIE MUSHATO, NOKULUNGA XOLILE MASHWAMA, DIDIBHUKU THWALA, and CLINTON AIGBAVBOA -
6.7 APPLICATION OF STRUT-TIE-METHOD (STM) TO RETROFIT AN EXISTING FOUNDATION ANCHORAGE PING JIANG, PRADIP KHAN, and LEI ZHOU
-
7.1 EFFECTS OF USING SEAWATER IN THE MIXING AND CURING OF CONCRETE HADEEL MOUSSAWEL -
7.2 CRUSHED LIMESTONE SAND: AN EFFECTIVE ALTERNATIVE TO NATURAL SAND IN CONCRETE FATEN ABI FARRAJ, THIERRY VIDAL, MARIE-PIERRE CUBAYNES, MAHER EL BARRAK, FADI HAGE CHEHADE, and GILLES ESCADEILLAS -
7.3 COMPRESSIVE STRENGTH OF GEOPOLYMER MORTAR USING GROUND FERRONICKEL SLAG AND FLY ASH JHUTAN CHANDRA KURI, MD NABI NEWAZ KHAN, and PRABIR KUMAR SARKER -
7.4 COMPRESSIVE STRENGTH EVALUATION OF LIGHTWEIGHT CONCRETE WITH EXPANDED GLASS AGGREGATE BY ULTRASONIC PULSE VELOCITY METHOD CHRISTOPHER COLLINS and SAMAN HEDJAZI -
7.5 EVALUATION OF COMPRESSIVE STRENGTH OF SYNTHETIC FIBER REINFORCED CONCRETE SAMAN HEDJAZI and DANIEL CASTILLO -
7.6 EFFECT OF SLAG AND GLASS ON CONCRETE PROPERTIES PRANSHOO SOLANKI, RYAN LONG, and XI HU -
7.7 EFFECT OF MIX PROPORTIONS ON THE PROPERTIES OF CLSM CONTAINING RECYCLED GLASS PRANSHOO SOLANKI -
7.8 IMPACT OF PARTIAL REPLACEMENT OF GRANITE WITH PERIWINKLE AND PALM KERNEL SHELLS ON CONCRETE STRENGTH KUNLE E. OGUNDIPE, ADEKUNLE M. AJAO, BABATUNDE F. OGUNBAYO, and ADEWALE S. ADEYI -
7.9 INVESTIGATION OF USING WASTE GLASS POWDER AS A SUPPLEMENTARY CEMENTITIOUS MATERIAL IN REACTIVE POWDER CONCRETE SHATHA HASAN and DOAA NAYYEF
-
8.1 WATER VAPOR TRANSPORT IN PLASTERS CONTAINING SUPERABSORBENT POLYMERS JAN FOŘT, MARTIN MILDNER, PETR HOTĚK, and ROBERT ČERNÝ -
8.2 EFFECT OF SUPERABSORBENT PARTICLE SIZE ON RHEOLOGY AND MECHANICAL PERFORMANCE OF CEMENT MORTARS JAN FOŘT, PETR HOTĚK, MARTIN MILDNER, and ROBERT ČERNÝ -
8.3 EFFECT OF LOAD BEARING MATERIALS ON SUSCEPTIBILITY TO BIOFILMS GROWTH VÁCLAV KOČÍ and JIŘÍ MADĚRA -
8.4 EXPERIMENTAL DETERMINATION OF ACOUSTIC BEHAVIOR OF BUILDING MATERIALS BY MEANS OF ACCELEROMETERIC MEASUREMENTS LUKÁŠ FIALA, PETR KONRÁD, and ROBERT ČERNÝ -
8.5 DEVELOPMENT OF LIME BASED, LOAD-BEARING MATERIALS FOR WALL CONSTRUCTION FIN O'FLAHERTY, FARAJ KHALAF, and VINCENZO STARINIERI -
8.6 LIGHTWEIGHT COATING MORTARS FOR BUILDINGS RESTORATION JAROSLAV POKORNÝ, LUCIE ZEMANOVÁ, MILENA PAVLÍKOVÁ, and ZBYŠEK PAVLÍK -
8.7 MAGNESIUM OXYCHLORIDE CEMENT-BASED COMPOSITE WITH FOAM GLASS USED AS LIGHTWEIGHT ADMIXTURE ADAM PIVÁK, ŠIMON MARUŠIAK, MARTINA ZÁLESKÁ, ZBYŠEK PAVLÍK, and MILENA PAVLÍKOVÁ -
8.8 PERFORMANCE OF CONCRETE MODIFIED WITH DISCARDED GLASS AT ELEVATED TEMPERATURES FOR SUSTAINABLE CONSTRUCTION OLUWAROTIMI OLOFINNADE, ANTHONY EDE, BEN NGENE, and AKPABOT AKPABOT -
8.9 ASSESSING AGING IN REINFORCED CONCRETE USING NOVEL REMOTE SENSING TECHNIQUES ANDREAS CHRISTOFE, CHRIS DANEZIS, and DIOFANTOS HADJIMITSIS
-
9.1 WIND LOADS ON ROOFING SYSTEM AND PHOTOVOLTAIC SYSTEM INSTALLED PARALLEL TO FLAT ROOF TETSUO YAMBE, YASUSHI UEMATSU, and KOSUKE SATO -
9.2 DESIGN WIND PRESSURE COEFFICIENTS FOR LOW-RISE GABLE-ROOFED STEEL BUILDINGS SEIYA GUNJI, KOSUKE SATO, and YASUSHI UEMATSU -
9.3 CONSIDERATIONS ON THE APPLICATION OF EUROCODES 2 AND 4 FOR CONCRETE BRIDGES PHILIPPE VAN BOGAERT -
9.4 EFFECT OF CFRP STRIPS BONDING LOCATION ON FLEXURAL CAPACITY AND DUCTILITY OF REINFORCED CONCRETE BEAMS MINA ISKANDER, MINA MELAD, MOURAD YASSER, WALEED ABDEL RAHIM, AMR MOSA, MOHAMED EL LAHAMY, MOHAMED ABOU-ZEID, and EZZELDIN SAYED-AHMED -
9.5 FINITE ELEMENT MODELING OF MECHANICALLY STABILIZED EARTH WALLS BUILT WITH WELDED WIRE WALL PANELS SAMAN HEDJAZI and DEJUAN SOLAN -
9.6 EXPERIMENTAL INVESTIGATION ON STRENGTHENING OF REINFORCED CONCRETE COLUMNS WITH CARBON CONCRETE COMPOSITE KLAUS HOLSCHEMACHER, DENNIS MESSERER, and WLADISLAW POLIENKO -
9.7 CORRELATION BETWEEN THE INSPECTION MANUAL SEVERITY CODES AND MOMENT COEFFICIENT FOR DETERIORATED CONCRETE BEAMS FIN O'FLAHERTY -
9.8 ALTERNATIVE DESIGNS OF MOLTEN SALT STORAGE SHELLS FOR USE IN SOLAR ENERGY STORAGE NATHAN LOYD and SAMAAN LADKANY -
9.9 EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE EFFECT OF SIZE IN POST-TENSIONED CONCRETE DECK SLABS SANA AMIR, COR VAN DER VEEN, and ANE DE BOER -
9.10 TEXTILE REINFORCED MORTAR BASED FLEXURAL STRENGTHENING OF REINFORCED CONCRETE BEAMS MUHAMMAD IMRAN RAFIQ and AMEER BAIEE -
9.11 PARAPET STIFFNESS EFFECT ON LOAD CARRYING CAPACITY OF MULTI-LANE CONCRETE SLAB BRIDGES SARAH JABER, MOUNIR MABSOUT, and KASSIM TARHINI
-
10.1 COMPARISON OF SHEAR WALLS AND MOMENT-RESISTING FRAMES IN EARTHQUAKE RESISTING BUILDINGS’ DESIGN AHMAD SHEIKH ABDALLAH and SAFWAN CHAHAL -
10.2 TORSIONAL STIFFNESS AS AN INFLUENCE PARAMETER ON ARCH STABILITY PHILIPPE VAN BOGAERT, GILLES VAN STAEN, and HANS DE BACKER -
10.3 BI-AXIAL STRESS-STRAIN RELATIONS FOR CONCRETE WITH ISOTROPIC AND ANISOTROPIC DAMAGE SIAMAK YAZDANI, GIUSEPPE LOMIENTO, and YAGOUB TRAD -
10.4 VIBRATION-BASED STRUCTURAL DAMAGE DETECTION TECHNIQUES: A REVIEW AKPABOT AKPABOT, ANTHONY EDE, OLUWAROTIMI OLOFINNADE, and ABIMBOLA ODETOYAN -
10.5 INFLUENCE OF GEOMETRY RECOVERY ON STRESS STATE OF OPTIMIZED PARTS BOŠTJAN HARL, JOŽEF PREDAN, MARKO KEGL, and DEJAN DINEVSKI -
10.6 AN ADAPTIVE RBF METHOD FOR DESIGN OPTIMIZATION OF BUILDING STRUCTURES QIAN WANG, LUCAS SCHMOTZER, and YONGWOOK KIM -
10.7 BEHAVIOR OF HIGH STRENGTH FIBER REINFORCED CONCRETE SQUARE COLUMNS WITH HYBRID BARS SAAD AL-TAAN and ABDULJALIL ALDOSKI -
10.8 SEISMIC ISOLATION OF WHOLE CITY QUARTERS FOR AN EFFECTIVE AND PRESERVATIVE RECONSTRUCTION MARCO MEZZI and ALESSANDRO FULCO
-
11.1 A STAKEHOLDER PERSPECTIVE ON THE IMPLEMENTATION OF SUSTAINABLE CONSTRUCTION PRACTICES NOKULUNGA XOLILE MASHWAMA, DIDIBHUKU THWALA, CLINTON AIGBAVBOA, and MANSUR HAMMA-ADAMA -
11.2 PAPER-SHADE: DEVELOPMENT OF SUSTAINABLE MODULAR BUILDING SHADING SYSTEMS UTILIZING RECYCLED PAPER TOWARDS SERIAL PRODUCTION ADONIS CLEANTHOUS and MARKELLA MENIKOU -
11.3 NOVEL MORTAR CONTAINING WASTE GLASS AND CLAY BRICK POWDER FOR SUSTAINABLE CONSTRUCTION OLUWAROTIMI OLOFINNADE, CYNTHIA CHIGERE, DAVID NDUKA, OPEYEMI JOSHUA, and BABATUNDE OGUNBAYO -
11.4 LATEST WORLDWIDE DEVELOPMENTS IN MOLTEN SALT TECHNOLOGY AND APPLICATIONS NATHAN LOYD and SAMAAN G. LADKANY -
11.5 COMPUTATIONAL ANALYSIS OF HEAT AND MASS TRANSPORT IN CHARACTERISTIC DETAIL OF INTERIOR THERMAL INSULATION SYSTEM JIŘÍ MADĚRA, JAN KOČÍ, and VÁCLAV KOČÍ -
11.6 APPLICATION OF FUZZY TOPSIS FOR SELECTING MOST SUSTAINABLE BUILDING WALL MATERIAL AHMAD NOFAL and AHMED HAMMAD -
11.7 DEVELOPMENT OF WASTE MANAGEMENT PLANNING FOR THE CONSTRUCTION SECTOR CONSIDERING CYCLE ECONOMY ELEFTHERIOS ELEFTHERIOU, ELIA A. TANTELE, RENOS A. VOTSIS, and ELENI CHARILAOU
Total Papers: 91